EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
제품 세부 정보
원래 장소: 중국
브랜드 이름: Anjeka
인증: ISO9001-2015
모델 번호: 안제카 6111
지불 및 배송 조건
최소 주문 수량: 25kg/드럼
포장 세부 사항: 25kg/드럼, 180kg/드럼
배달 시간: 3~5일
지불 조건: L/C, T/T, 웨스턴 유니온
공급 능력: 100톤/월
모습: |
황색 액체를 밝히도록 무색입니다 |
애플리케이션: |
코팅 산업 |
밀도 g/cm3 (23℃): |
1.00-1.30 |
산가 (마그네슘 코우 / Ｇ): |
150-250 |
점도cps(25℃): |
100-800 |
유효 성분(%): |
100 |
보관 시간: |
12개월 |
화학 성분:: |
산성기와 공중합된 용액 |
제품명: |
습윤분산제 |
모습: |
황색 액체를 밝히도록 무색입니다 |
애플리케이션: |
코팅 산업 |
밀도 g/cm3 (23℃): |
1.00-1.30 |
산가 (마그네슘 코우 / Ｇ): |
150-250 |
점도cps(25℃): |
100-800 |
유효 성분(%): |
100 |
보관 시간: |
12개월 |
화학 성분:: |
산성기와 공중합된 용액 |
제품명: |
습윤분산제 |
Anjeka-6111 is a wetting and dispersing additive for solvent-borne and solvent-free coatings that improves pigment wetting, reduces the time required for the grinding process and stabilizes pigment dispersion.
The data given on this data sheet are typical values, not product specifications.
Layering and turbidity may occur at temperatures below 10˚C. Heat to 20˚C and mix thoroughly before use.
Storage time is not recommended to exceed 12 months.
This product should be stored in airtight containers and should not be re-stored after pre-dilution.
Because of its high acid value, the additive may potentially accelerate the reaction of baking systems. Check the increase in viscosity during storage is necessary.
Coating Industry
Anjeka-6111 is mainly used in high solids and solvent-free coatings. Due to its anionic properties, it is well suited for acid-catalyzed systems (e.g. coil coatings). Anjeka-6111 stabilizes inorganic pigments, especially titanium dioxide, which increases gloss, reduces haze, and considerably reduces the viscosity of the abrasive, and it can be used in conjunction with pigment pastes stabilized with the Anjeka range of additives. It can be used with pigment pastes stabilized with Anjeka additives.
●--Special Recommendations; ○--Recommendations
The amount of additives (in purchased form) is based on the pigment:
The above data are empirical, the optimum dosage should be determined by a series of tests.
In order to obtain the best performance, the additives should be added to the abrasive before the pigments.
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3.R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Tags:
비디오
비디오
