EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
제품 세부 정보
원래 장소: 중국
브랜드 이름: Anjeka
인증: ISO9001-2015
모델 번호: 안케카6042
지불 및 배송 조건
최소 주문 수량: 25kg
포장 세부 사항: 25kg/드럼
배달 시간: 3~5일
지불 조건: L/C, D/P, T/T, 웨스턴 유니온
공급 능력: 100톤/월
모습: |
미황색이 액체를 갈변시킵니다 |
산가: |
(mg KOH/g) 5-40 |
아민 가치: |
(mg KOH/g) 5-40 |
밀도: |
00.80~1.00g/cm3 |
점착성 초당 주파수: |
(25℃) 50-500 |
활성 성분: |
100% |
제품명: |
중합체 분산제 |
응용 분야: |
용제형 저극성 코팅 및 인쇄잉크 |
모습: |
미황색이 액체를 갈변시킵니다 |
산가: |
(mg KOH/g) 5-40 |
아민 가치: |
(mg KOH/g) 5-40 |
밀도: |
00.80~1.00g/cm3 |
점착성 초당 주파수: |
(25℃) 50-500 |
활성 성분: |
100% |
제품명: |
중합체 분산제 |
응용 분야: |
용제형 저극성 코팅 및 인쇄잉크 |
Polymer dispersant suitable for dispersing pigments in low polarity coatings.
| Chemical composition | highly branched polymer solution |
| Appearance | Light yellow to brown liquid |
| Acid value (mg KOH/g) | 5-40 |
| Amine value (mg KOH/g) | 5-40 |
| Density g/cm³ (23℃) | 0.80-1.00 |
| Viscosity cps (25℃) | 50-500 |
| Active ingredient (%) | 100 |
The data presented on this data sheet are typical values only and do not constitute technical specifications for the product.
Please stir well before use, delamination or turbidity may occur when the temperature is lower than 0℃, it should be heated to 30℃-40℃ and stirred well before use.
Ceramic Ink Features and Benefits
Anjeka-6402A can be used in low polarity ceramic inkjet inks with hydrocarbon and fatty acid esters, either as a dispersant alone or in combination with other products. This product also helps to shorten the grinding time and filtration time of ceramic colorant slurry, improve productivity, and prepare ceramic inks with Newtonian fluid properties. It helps to improve the storage stability of the colorants in ceramic inks, reduce sedimentation, and improve the vivid color.
This additive is recommended for dispersing colorants in ceramic inks.
Dosage of additives (in purchased form) based on the pigment: 10%-50%.
The optimum dosage should be determined through a series of tests.
For best performance, the additive should be added to the abrasive first, mixed well and then added to the colorant.
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.