EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
제품 세부 정보
원래 장소: 중국
브랜드 이름: Anjeka
인증: ISO9001-2015
모델 번호: 안예카6040
지불 및 배송 조건
최소 주문 수량: 25kg
포장 세부 사항: 25kg/드럼
배달 시간: 3~5일
지불 조건: L/C, D/P, T/T, 웨스턴 유니온
공급 능력: 100톤/월
모습: |
갈색 노란색 투명한 액체 |
애플리케이션: |
자동차 보수용 페인트, 용제형 잉크, 코일 코팅 |
호환성: |
다양한 안료 및 수지와 호환 가능 |
밀도: |
0.90-1.10g/cm3 |
산 값 (mg koh/g): |
1-20 |
아민가(mg KOH/g): |
1-20 |
저장: |
직사광선을 피해 서늘하고 건조한 곳에 보관하세요 |
점도: |
5-250 |
용제: |
맞춤형 |
모습: |
갈색 노란색 투명한 액체 |
애플리케이션: |
자동차 보수용 페인트, 용제형 잉크, 코일 코팅 |
호환성: |
다양한 안료 및 수지와 호환 가능 |
밀도: |
0.90-1.10g/cm3 |
산 값 (mg koh/g): |
1-20 |
아민가(mg KOH/g): |
1-20 |
저장: |
직사광선을 피해 서늘하고 건조한 곳에 보관하세요 |
점도: |
5-250 |
용제: |
맞춤형 |
Anjeka 6040 is a polymeric dispersant suitable for dispersing pigments in solvent-borne coatings.
hyperbranched polyester compound with imide anchoring functional group.
The values given in this data sheet describe the typical properties and do not constitute specification limits.
| Active matter content: | 40% |
| Acid value: | 1-20 mg KOH/gl |
| Amine value: | 1-10 mg KOH/g |
| Density: | 0.94-1.00g/ml(20℃) |
| Flash point: | 24℃ |
| Color: | Light yellow to brown liquid |
| Solvent: | n-butyl acetate |
Separation and turbidity may occur at temperatures below 0℃. Warm to 30℃ and mix well before use.
The surface-treatment of some organic pigments may negatively affect the efficiency of the additive. In such cases, tests with the untreated pigment of the same type may be successful.
Coatings industry and printing inks.
Anjeka 6040 enhances the luster of organic pigments, intensifies colors, provides anti-flocculation properties, and minimizes haze resulting from uneven dispersion. Particularly noteworthy is its effectiveness in enhancing the dispersion of surface carbon black, leading to an improved richness of the coating's black color. Additionally, this product contributes to decreased grinding time, heightened productivity, and improved storage stability of the coating.
This additive is best utilized for dispersing pigments and inks within solvent-based coatings, providing stabilization for organic pigments, with a specific focus on enhancing the stability of carbon black. Its versatility extends to compatibility with various coating resins, including but not limited to polyester resins, polyurethane resins, and acrylic resins.
The amount of additive (as supplied form) is based on the pigment
| Inorganic pigments: | 4%-8% |
| Organic pigments: | 10%-50% |
| Carbon blacks: | 10%-80% |
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
For the best performance, the additive must be added into the millbase before addition of pigments. Do not add the pigments until the additive has been homogeneously and uniformly distributed.
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국