EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
제품 세부 정보
원래 장소: 중국
브랜드 이름: Anjeka
인증: ISO9001-2015
모델 번호: Anjeka6042A
지불 및 배송 조건
최소 주문 수량: 25KG
포장 세부 사항: 25kg/드럼
배달 시간: 3~5일
지불 조건: L/C, D/P, T/T, 웨스턴 유니온
공급 능력: 100톤/월
모습: |
미황색이 액체를 갈변시킵니다 |
산가: |
(mg KOH/g) 2-40 |
아민 가치: |
(mg KOH/g) 2-40 |
밀도: |
00.80~1.00g/cm3 |
점착성 초당 주파수: |
(25℃) 100-1000 |
활성 성분: |
50% |
용제: |
흰색 미네랄 오일 |
제품명: |
폴리머 디스퍼런트 |
모습: |
미황색이 액체를 갈변시킵니다 |
산가: |
(mg KOH/g) 2-40 |
아민 가치: |
(mg KOH/g) 2-40 |
밀도: |
00.80~1.00g/cm3 |
점착성 초당 주파수: |
(25℃) 100-1000 |
활성 성분: |
50% |
용제: |
흰색 미네랄 오일 |
제품명: |
폴리머 디스퍼런트 |
Anjeka-6402A is a polymeric dispersant engineered for dispersing colorants in low-polarity ceramic inkjet inks.
Chemical Composition: Solution of a highly branched polymer.
Typical Physical & Chemical Data:
(The values provided are typical and are not intended as product specifications.)
| Property | Value |
|---|---|
| Appearance | Light Yellow to Brown Liquid |
| Acid Value | 2 – 40 mg KOH/g |
| Amine Value | 2 – 40 mg KOH/g |
| Density | 0.80 – 1.00 g/cm³ (at 23°C) |
| Viscosity | 100 – 1,000 mPa·s (at 25°C) |
| Active Content | 50% |
| Solvent | White Mineral Oil |
Always stir well before use.
Separation or turbidity may occur if stored below 0°C. In this case, warm the material to 30–40°C and stir thoroughly until homogeneous prior to use.
For Ceramic Inks:
Features & Benefits:
Anjeka-6402A is designed for use in low-polarity ceramic inkjet inks based on hydrocarbon or fatty acid ester systems. It can be employed as the sole dispersant or in combination with other additives. This product significantly reduces the grinding and filtration time of ceramic colorant slurries, thereby enhancing production efficiency. It facilitates the preparation of ceramic inks with Newtonian flow behavior, improves the storage stability of colorants by minimizing sedimentation, and contributes to more vivid color development.
This additive is recommended for dispersing colorants in ceramic ink formulations.
Dosage (as supplied) based on pigment weight: 10% – 50%.
Note: The optimum dosage must be determined through practical testing.
For optimal performance, incorporate the additive into the mill base first, mix thoroughly, and then add the colorants.
25 kg Lined Iron Drum
200 kg Tight-Head Plastic Drum
Our company:
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
Benefits to our customers and partners:
Collaboration Opportunities:
