EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
제품 세부 정보
원래 장소: 중국
브랜드 이름: Anjeka
인증: ISO9001-2015
모델 번호: Anjeka5066N
지불 및 배송 조건
최소 주문 수량: 25KG
포장 세부 사항: 25kg/드럼, 180kg/드럼
배달 시간: 3~5일
지불 조건: L/C, T/T, 웨스턴 유니온
공급 능력: 200개 톤 / 달
모습: |
무색 투명한 액체 |
애플리케이션: |
용매로 만든 코팅과 자외선 시스템 |
호환성: |
폼을 제거하는 특성과 호환성 사이의 좋은 균형. |
화학 성분:: |
거품을 깨는 폴리머 실리콘 용액. |
용제: |
이소 포론 |
유효 성분(%): |
1 |
밀도 g/cm²(23°C): |
0.70-0.90 |
모습: |
무색 투명한 액체 |
애플리케이션: |
용매로 만든 코팅과 자외선 시스템 |
호환성: |
폼을 제거하는 특성과 호환성 사이의 좋은 균형. |
화학 성분:: |
거품을 깨는 폴리머 실리콘 용액. |
용제: |
이소 포론 |
유효 성분(%): |
1 |
밀도 g/cm²(23°C): |
0.70-0.90 |
Ankeka5066N silicone defoamer for all solvent based systems
GENERAL DESCRIPTION
Anjeka-5066N is a silicone defoamer for solvent-borne and solvent-free systems.
PRODUCT DATA
Chemical composition: Foam-breaking polymer silicone solution.
Typical Physical and Chemical Data:
The data given on this data sheet are typical values and are not product specifications.
Appearance Colorless Transparent Liquid
Solvent Isophorone
Active ingredient (%) 1
Density g/cm³ (23°C) 0.70-0.90
STORAGE and TRANSPORT
Layering and turbidity may occur at temperatures below 5 °C. Heat to 20 °C and mix thoroughly before use.
Storage is not recommended for more than 12 months.
SPECIAL NOTES
The full effect of the defoamer can only be obtained after 24 hours in the system.
APPLICATION GUIDELINES
Industrial Coatings
Features and Benefits:
Anjeka-5066N is a highly effective defoamer that provides optimum defoaming with a minimum of incompatibilities. It can be used in all solvent based systems. It provides a good balance between defoaming properties and compatibility.
APPLICATION SECTORS
Solvent-borne coatings and UV systems.
RECOMMENDED LEVELS
0.1-0.7% Additives (in purchased form) are based on the total formulation.
The above data are empirical and the optimum dosage should be determined through a series of tests.
INCORPORATION AND PROCESSING INSTRUCTIONS
For optimum performance, the defoamer should be added to the grinding media prior to grinding. If added at a later stage, the shear force must be high enough to ensure good dispersion of the defoamer to prevent shrinkage.
PACKING
-25kg iron drum with inner coating
-180kg ring plastic drum
Our team:
Our company:
We are building a new large-scale production base
strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.
Benefits to our customers and collaboration partners:
• stable large-scale production, better quality control
• lower production unit cost
Collaboration Opportunities:
• contract manufacturing and OEM/ODM collaboration opportunities
Our Certifcate&Patents
Tags:
