ANJEKA6042B dispersing agent for inorganic pigment fillers, organic pigments and carbon black in low-polar ester solvents

GENERAL DESCRIPTION

It is suitable for dispersing inorganic pigment fillers, organic pigments and carbon black in low-polar ester solvents such as dibutyl phthalate and dioctyl terephthalate.

PRODUCT DATA

Chemical composition: Highly branched polymer solution.

Typical Physical and Chemical Data:

The data given on this data sheet are typical values and are not product specifications.

Appearance Light yellow to brown liquid

Acid value (mg KOH/g) 2-40

Amine value (mg KOH/g) 2-40

Density g/cm³ (23℃) 0.80-1.10

Viscosity cps (25℃) 100-1000

Active ingredient (%) 100

STORAGE and TRANSPORT

Please stir well before use, delamination or turbidity may occur when the temperature is lower than 0℃, it should be heated to 30℃-40℃ and stirred well before use.

APPLICATION GUIDELINES

Characteristics and advantages:

Anjeka-6402B can be used to disperse inorganic pigment fillers, organic pigments and carbon blacks in low-polarity ester solvents. It helps to shorten the grinding time of slurries and increase productivity. The additive reduces the viscosity of the milled slurry, which improves flow and allows for higher pigment additions. The additive unflocates and stabilizes pigments through spatial site resistance. Due to the small size of the deflocculated pigment particles, gloss, color strength, transparency and hiding power of the coating can be increased.

APPLICATION SECTORS

This additive is recommended for dispersing inorganic pigment fillers, organic pigments and carbon blacks in low polarity ester solvents.

RECOMMENDED LEVELS

The amount of additive (in purchased form) is based on the pigment:

Titanium dioxide: 5%-10%

Inorganic pigments: 5%-20

Organic pigments: 20%-60

Carbon black: 50%-80

The optimum dosage should be determined through a series of tests.

INCORPORATION AND PROCESSING INSTRUCTIONS

In order to obtain the best performance, the additive should be added to the abrasive first, mixed well and then added to the colorant.

PACKAGING

-25kg iron drum with inner coating

-200kg ring plastic drum

Our service

1. Respond to inquiries within 24 hours.

2. Superior quality products at competitive prices.

3. Strong R&D and technical support.

4. Dedicated professional team service.

5. Flexible customized production for various packaging options.

6. On-time delivery with no delays.

Our team:

We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity

of 6,000 tonnes.

The interface additives project was officially established in the Songzi Chemical Park in November 2022.

Benefits to our customers and partners:

Stable large-scale production with enhanced quality control

Lower unit production cost

Collaboration Opportunities:

Contract manufacturing

OEM / ODM partnerships