EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
제품 세부 정보
원래 장소: 중국
브랜드 이름: ANJEKA
인증: ISO9001-2015
모델 번호: ANJEKA6164A
지불 및 배송 조건
최소 주문 수량: 25Kg/드럼
가격: USD12
포장 세부 사항: 25Kg/드럼
배달 시간: 5~8일
지불 조건: L/C, T/T, 웨스턴 유니온
공급 능력: 3000Ton/year
화학적 구성 요소:: |
안료 친화성 그룹을 함유한 고분자량 블록 공중합체 용액. |
모습: |
노란색 액체 |
산가 (마그네슘 코우 / Ｇ): |
1-15 |
아민가(mg KOH/g): |
1-20 |
밀도 g/cm²(23°C): |
1.10-1.20 |
유효 성분(%): |
100 |
화학적 구성 요소:: |
안료 친화성 그룹을 함유한 고분자량 블록 공중합체 용액. |
모습: |
노란색 액체 |
산가 (마그네슘 코우 / Ｇ): |
1-15 |
아민가(mg KOH/g): |
1-20 |
밀도 g/cm²(23°C): |
1.10-1.20 |
유효 성분(%): |
100 |
ANJEKA-6164A dispersion of large molecule organic color pigment
GENERAL DESCRIPTION
ANJEKA-6164A is a wetting and dispersing additive for solvent-borne automotive coatings, industrial coatings and pigment concentrates. It is particularly suitable for stabilizing very fine carbon blacks and organic pigments, especially in two-component polyurethane and baking systems, and significantly reduces the viscosity of abrasives.
PRODUCT DATA
Chemical composition: Solution of a modified polyurethane copolymer with pigment affinity groups.
The data given on this data sheet are typical values and are not product specifications.
Appearance : Yellow liquid
Acid value (mg KOH/g): 1 - 15
Amine value (mg KOH/g): 1 - 15
Density g/cm³ (23°C): 0.90 - 1.10
Active ingredient % : 38
STORAGE and TRANSPORT
Layering or turbidity may occur at temperatures below 0°C. Heat to 20°C and mix thoroughly.
Storage time is not recommended to exceed 12 months.
SPECIAL NOTES
The surface treatment of some organic pigments may adversely affect the effectiveness of this wetting and dispersing additive. In such cases, untreated pigments of the same type may be used. When used in coil coatings, the interaction between the cationic additive and the acid catalyst must be considered. Free or epoxy-encapsulated acids are preferable to amine-encapsulated acids.
APPLICATION GUIDELINES
Industrial Coatings
Features and Benefits:
The additive unflocates and stabilizes the pigment by spatial site resistance.ANJEKA-6164A provides the same charge to the pigment particles. The resulting repulsive and spatial stabilization prevents possible co-flocculation and prevents color float and bloom in multi-color systems. The result is an increase in gloss, color strength, transparency and hiding power, as well as a reduction in milling viscosity.
APPLICATION SECTORS
Industrial coatings ●
Automotive coatings ●
Architectural coatings
Anti-corrosion coating systems
●--Special recommendation; ○--Recommendation
RECOMMENDED LEVELS
The amount of additives (in purchased form) is based on the pigment:
Titanium dioxide: 5%-6%
Inorganic pigments: 10%-15
Organic pigments: 30%-80
Carbon black: 70%-140
The above data are empirical and the optimum dosage should be determined through a series of tests.
INCORPORATION AND PROCESSING INSTRUCTIONS
For optimum performance, add the additives to the abrasive before adding the pigments. Pre-mix the resin and solvent components of the abrasive and add the additives slowly with stirring. Do not add pigments until the additives are well mixed.
PACKAGING
-25kg iron drum with inner coating
-180kg ring plastic drum
Our service:
1. Respond to inquiries within 24 hours.
2. Superior quality products at competitive prices.
3. Strong R&D and technical support.
4. Dedicated professional team service.
5. Flexible customized production for various packaging options.
6. On-time delivery with no delays.
Our team:
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
Benefits to our customers and partners:
Stable large-scale production with enhanced quality control
Lower unit production cost
Collaboration Opportunities:
Contract manufacturing
OEM / ODM partnerships
