EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
제품 세부 정보
원래 장소: 중국
브랜드 이름: ANJEKA
인증: ISO9001-2015
모델 번호: 7334
지불 및 배송 조건
최소 주문 수량: 25kg
포장 세부 사항: 25kg/드럼
배달 시간: 5~8일
지불 조건: L/C, T/T, 웨스턴 유니온
밀도: |
0.9-1.1(g/cm3, 23°C에서) |
점도: |
300~1500 |
활성 콘텐츠: |
100% |
모습: |
무색~약황색의 투명한 액체 |
포장: |
25/200kg 더덤 |
혼입: |
생산 공정의 어느 단계에서나 추가 가능 |
권장 수준: |
0.1~0.3% |
제품명: |
레벨링 에이전트 |
밀도: |
0.9-1.1(g/cm3, 23°C에서) |
점도: |
300~1500 |
활성 콘텐츠: |
100% |
모습: |
무색~약황색의 투명한 액체 |
포장: |
25/200kg 더덤 |
혼입: |
생산 공정의 어느 단계에서나 추가 가능 |
권장 수준: |
0.1~0.3% |
제품명: |
레벨링 에이전트 |
Anjeka-7334 is a silicone additive for waterborne coatings, printing inks, and overprint varnishes, providing leveling and crater prevention properties.
Chemical Composition: Organically modified polysiloxane
Typical physical and chemical data:
The data given in this data sheet are typical values, not technical specifications of the product.
| Property | Value |
|---|---|
| Appearance | Colorless to slightly yellow transparent liquid |
| Solubility | Waterborne |
| Density (23°C) (g/cm³) | 0.90–1.10 |
| Viscosity (25°C) (cps) | 300–1500 |
| Active matter (%) | 100 |
Separation or turbidity may occur below 5°C; warm to 20°C and mix thoroughly. Store in a cool, dry place. Storage for more than 12 months is not recommended.
Long-term stability in coating systems at pH 4–10. To avoid turbidity, formulations containing Anjeka-7334 should include a small amount of co-solvent (approximately 5% of the total solvent content).
Features & Benefits:
Anjeka-7334 is an organically modified polysiloxane with very short repeating units. It improves leveling and substrate wetting by strongly reducing the surface tension of waterborne systems. It exhibits little to no foam stabilization; causes no interlayer adhesion issues and does not affect recoatability; provides good wetting of white carbon black (silica). With its excellent compatibility, it can also be used as an anti-crater additive.
Waterborne systems
0.1–0.3% additive (as supplied) based on total formulation.
The above levels are for guidance. The optimum dosage should be determined through a series of application-related tests.
Can be added at any stage of the production process, including post-addition.
25 kg internally lacquered steel drum
200 kg plastic drum with hoop
Our team:
Our company:
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
Benefits to our customers and partners:
Stable large-scale production with enhanced quality control
Lower unit production cost
Collaboration Opportunities:
Contract manufacturing
OEM / ODM partnerships
Tags:
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
