EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
제품 세부 정보
원래 장소: 중국
브랜드 이름: Anjeka
인증: ISO9001-2015
모델 번호: 안예카6272
지불 및 배송 조건
최소 주문 수량: 25KG
포장 세부 사항: 25kg/드럼
배달 시간: 3~5일
지불 조건: L/C, T/T, 웨스턴 유니온
공급 능력: 100톤/월
모습:: |
담황색 액체 |
산가 (마그네슘 코우 / Ｇ): |
1-15 |
아민가(mg KOH/g): |
1-15 |
밀도 g/cm3 (23℃): |
10.00-1.20 |
점도cps(25℃): |
300-3000 |
유효 성분(%): |
80 |
용제: |
물 |
제품명: |
비이온성 블록 공중합체 분산제 |
보관 시간: |
12 개월. |
신청 지침: |
수성 잉크, 코팅제, 수성 범용 컬러 페이스트. |
모습:: |
담황색 액체 |
산가 (마그네슘 코우 / Ｇ): |
1-15 |
아민가(mg KOH/g): |
1-15 |
밀도 g/cm3 (23℃): |
10.00-1.20 |
점도cps(25℃): |
300-3000 |
유효 성분(%): |
80 |
용제: |
물 |
제품명: |
비이온성 블록 공중합체 분산제 |
보관 시간: |
12 개월. |
신청 지침: |
수성 잉크, 코팅제, 수성 범용 컬러 페이스트. |
Anjeka-6272 is a polymer dispersant for aqueous coating systems, printing inks and adhesives. It is a standard additive for resin-free pigment concentrates. It is mainly used for organic pigments and carbon blacks, and has good viscosity reduction and color spreading properties.
Chemical composition: nonionic block copolymer
Typical Physical Chemistry Data:
The data given on this data sheet are typical values and are not technical specifications of the product.
When stored or transported at temperatures below 15°C, delamination or turbidity may occur. Heat to 40°C and stir before use.
Storage time is not recommended to exceed 12 months.
Water-based inks, coatings, water-based general-purpose color pastes.
Properties and advantages.
This additive causes pigment deflocculation through spatial stabilization. Due to the small particle size of the deflocculated pigment, it is possible to obtain a high gloss, as well as an increase in color strength. In addition, the transparency of transparent pigments and the hiding power of opaque pigments are improved. Due to the reduced viscosity, the flow properties are improved and the pigment content can be increased.
This additive is particularly suitable for the production of stable, resin-free pigment concentrates with pigment contents of 30-70%. These pigment concentrates can be used for paint mixing with standard aqueous bases.
●--Special recommendation; ○--Recommendation
This additive is also recommended for the production of stabilized resin-free pigment concentrates for the preparation of waterborne coatings with no floating/blooming colors.
Additive dosage (in purchased form) is based on pigment:
The above data are empirical and the optimum dosage should be determined through a series of tests.
It can be added before grinding, and has good general effect in water-soluble, aqueous dispersion and emulsion system.
비디오
비디오
