EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
제품 세부 정보
원래 장소: 중국
브랜드 이름: Anjeka
인증: ISO9001-2015
모델 번호: Anjeka7361
지불 및 배송 조건
최소 주문 수량: 25KG
포장 세부 사항: 25kg/드럼, 180kg/드럼
배달 시간: 3~5일
지불 조건: L/C, T/T, 웨스턴 유니온
공급 능력: 200개 톤 / 달
모습: |
투명성 액체 |
애플리케이션: |
모든 코팅, 인쇄 잉크 및 실온 경화 플라스틱. |
호환성: |
대부분의 코팅과 호환 가능 |
밀도: |
1.03g/cm3 |
저장: |
서늘하고 건조한 곳에 보관하세요 |
표면 장력: |
낮은 표면 긴장 |
복용량: |
0.05 – 0.5% |
제품명: |
아크릴 레벨링제 |
복용량 범위: |
0.05 – 0.5% |
화학 성분: |
폴리아크릴레이트 용액 |
점도: |
100~1000cps |
활성 성분: |
70% |
용제: |
트리에틸렌글리콜부틸에테르 |
모습: |
투명성 액체 |
애플리케이션: |
모든 코팅, 인쇄 잉크 및 실온 경화 플라스틱. |
호환성: |
대부분의 코팅과 호환 가능 |
밀도: |
1.03g/cm3 |
저장: |
서늘하고 건조한 곳에 보관하세요 |
표면 장력: |
낮은 표면 긴장 |
복용량: |
0.05 – 0.5% |
제품명: |
아크릴 레벨링제 |
복용량 범위: |
0.05 – 0.5% |
화학 성분: |
폴리아크릴레이트 용액 |
점도: |
100~1000cps |
활성 성분: |
70% |
용제: |
트리에틸렌글리콜부틸에테르 |
Anjeka-7361 is used as an acrylic leveling agent for a variety of waterborne coatings, solventborne coatings, printing inks, and room temperature curing plastics. It improves the leveling of coatings and also prevents shrinkage.
Chemical composition: polyacrylate solution.
The data given on this data sheet are typical values and are not product specifications.
| Property | Value |
|---|---|
| Appearance | Yellow liquid |
| Density g/cm³ (23°C) | 0.90-1.10 |
| Viscosity cps (25°C) | 100-1000 |
| Active ingredient (%) | 70 |
| Solvent | Triethylene glycol butyl e ther |
Store in a cool and dry place. Stir well before use. Storage time is not recommended to exceed 12 months.
This additive can be used as a shrinkage prevention and leveling improvement additive in all aqueous, solvent-borne and solvent-free coating formulations. It enhances gloss and long-wave leveling of coatings. It reduces surface tension only slightly and does not affect recoatability or interlayer adhesion.Anjeka-7361 does not cause turbidity in clear coats or haze in color coats.
The additive improves leveling and gloss. It is suitable for all solvent-free and aqueous UV printing inks and overprint varnishes. It reduces surface tension only slightly and does not affect recoatability and interlayer adhesion.
This additive is recommended for all coatings, printing inks and room temperature curing plastics.
0.05-0.5% The amount of additive (as supplied) is based on the total formulation.
The above data are empirical and optimum amounts should be determined through a series of tests.
The additive can be added at any stage, including post addition.
We are building a new large-scale production base
strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.
Tags:
