EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
제품 세부 정보
원래 장소: 중국
브랜드 이름: Anjeka
인증: ISO9001-2015
모델 번호: Anjeka7411
지불 및 배송 조건
최소 주문 수량: 25kg
포장 세부 사항: 25Kg/드럼
배달 시간: 3~5일
지불 조건: L/C, T/T, 웨스턴 유니온
화학적 구성 요소:: |
변형된 폴리디메틸실록산. |
모습: |
투명한 액체 |
밀도 g/cm3 (23℃): |
0.95-1.05 |
점도cps(25°C): |
200-500 |
비중: |
0.93 |
유효 성분(%): |
100 |
저장: |
서늘하고 통풍이 잘 되는 곳에 |
화학적 구성 요소:: |
변형된 폴리디메틸실록산. |
모습: |
투명한 액체 |
밀도 g/cm3 (23℃): |
0.95-1.05 |
점도cps(25°C): |
200-500 |
비중: |
0.93 |
유효 성분(%): |
100 |
저장: |
서늘하고 통풍이 잘 되는 곳에 |
ANJEKA-7411
GENERAL DESCRIPTION
Anjeka-7411 is a modified polydimethylsiloxane compound, which is a highly efficient silicone wetting aid.
PRODUCT DATA
Chemical composition: modified polydimethylsiloxane.
Typical physical and chemical data:
The data given on this data sheet are typical values, not product specifications.
Appearance Transparent liquid
Density g/cm³ (23℃) 0.95-1.05
Viscosity cps (25°C) 200-500
Active ingredient (%) 100
STORAGE and TRANSPORT
Place in a cool, ventilated place and store in a dry environment at 5-35°C.
Storage time is not recommended to exceed 12 months.
APPLICATION GUIDELINES
Industrial Coatings
Features and Benefits:
Anjeka-7411 is a highly effective silicone additive for wetting difficult substrates with low surface tension. It is effective in solving coating problems when the substrate is contaminated with silicone oil or grease, which can cause topcoat coating problems (such as poor adhesion, cratering, etc.). It has excellent leveling, smoothing and mold release properties, and can be used in heat-resistant non-stick kitchenware coating formulations, with a heat-resistant temperature of up to 280℃. When used in fabric processing, it has softness, water pulling and smoothing effects, and increases the durability of water washing resistance. Soluble in benzene and mineral oil solvents.
APPLICATION SECTORS
Suitable for industrial coatings, automotive coatings, inks, etc.
RECOMMENDED LEVELS
Dosage of additives (in purchased form) is based on 0.1-0.5% of the total formula.
The above data are empirical and the optimum dosage should be determined through a series of
tests.
INCORPORATION AND PROCESSING INSTRUCTIOS
It can be added at any stage of the production process or later. For convenience, the additives can also be diluted with a suitable solvent and then added.
PACKAGING
-25kg iron drum with inner coating.
Our service:
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3. R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Our team:
Our company:
Our Certifcate&Patents
Tags:
