TEGO 4100 Aquatic Substrate Wetting Agent for Aqueous Systems improved wetting and reduced cratering also Reduction of Surface Tension

DESCRIPTION

Anjeka-7425A is an acetylenic diol-modified siloxane wetting agent designed for aqueous coatings, printing inks, and overprint varnishes. It powerfully reduces surface tension and significantly enhances substrate wetting, effectively preventing crater formation while also delivering excellent defoaming and foam suppression performance.

PRODUCT DATA

Chemical Composition: Acetylenic diol-modified siloxane.
Typical Physical & Chemical Data:
The data provided in this sheet are typical values and are not intended solely as product specifications.

STORAGE and TRANSPORT
Separation or turbidity may occur if stored below 5 °C. If this happens, warm the material to 20 °C and mix thoroughly until homogeneous.
A shelf life of 12 months is recommended.

SPECIAL NOTES

It demonstrates excellent long-term stability in coating systems with a pH range of 4-10. To avoid haze, formulations containing Anjeka-7425 should include a small amount of co-solvent (approximately 5% of the total solvent). In systems with very high co-solvent content, the effectiveness of this silicone surfactant may decrease. For such formulations, we recommend using Anjeka-7333.

APPLICATION GUIDELINES

Industrial Coatings

Features and Benefits:

This additive enhances leveling and substrate wetting by strongly reducing the surface tension of aqueous systems. It has no or slight foam stabilizing effect, does not reduce recoatability, and has good wettability for white carbon black. The additive does not increase surface slip. For higher surface slip it is recommended to add Anjeka-7333.

APPLICATION SECTORS

Industrial Coatings.

Features & Benefits:
This additive effectively reduces both static and dynamic surface tension. It offers high compatibility for easy incorporation, enhances substrate wetting, and provides excellent foam suppression and defoaming performance. It does not increase surface slip. If higher surface slip is required, we recommend adding Anjeka-7333 separately.

RECOMMENDED LEVELS

0.05-0.5% of additives (in purchased form) based on total formulation.

The above figures are empirical and the optimum amount should be determined through a series of tests.

INCORPORATION and PROCESSING INSTRUCTIOS

This additive can be added at any stage of production, though we recommend incorporation during the final manufacturing phase of the coating.

PACKAGING

-25 kg / Iron Drum with Lining
-180 kg / Tight-Head Plastic Drum

Our service:

Our team:

Our company:

We are building a new large-scale production base

strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.

Benefits to our customers and collaboration partners:

• stable large-scale production, better quality control

• lower production unit cost

Collaboration Opportunities:

• contract manufacturing and OEM/ODM collaboration opportunities

Our Certifcate&Patents